Industrial Machinery

Fives HPM Offers RoboTDM Robotic Machining for Large Parts

The Liné Machines RoboTDM brings milling, trimming and drilling to large workpieces where about 0.1 mm tolerance is sufficient, avoiding the cost and footprint of a large CNC machine.

Pietro AnselmiOctober 29, 20265 min read1 views

A robotic arm with a spindle end effector is shown machining a large panel in a manufacturing bay, illustrating robot-based machining for oversized parts.

Fives High Precision Machines (Fives HPM) has developed the Liné Machines RoboTDM, a robotic machining system designed to bring milling, trimming and drilling directly to large workpieces. The company says the approach can reduce setup time and programming effort while avoiding the cost and floor-space demands of a large CNC machine tool.

A robot at the workpiece

Rather than moving a large component into a machine envelope, RoboTDM mounts a specialized end effector—including a spindle, toolholder and cutter—on an industrial robot. The robot is positioned at the part and performs material removal where needed. Fives says this arrangement suits applications where tolerances down to approximately 0.1 mm are acceptable, but where the full capability of a high-precision CNC machine is not required.

The system is intended for operations such as face milling and deburring castings, trimming excess weld beads, drilling pilot holes in large aerospace panels or automotive body parts, and trimming, routing, drilling, edge contouring and pocketing on large composite or thermoplastic fabrications. Fives notes that using a CNC machine for such work can involve substantial setup and programming time.

Accuracy gains and cycle-time claims

Conventional industrial robots have typically achieved positional accuracy of around 0.3 mm, which Fives says is insufficient for many machining tasks. The RoboTDM development program focused on narrowing that gap through high-precision robotic machining. Robot calibration, look-ahead and motion-planning algorithms allow programs with more than one million points to be processed without latency that could otherwise disrupt robot motion, according to the company.

Fives says the resulting trajectories are smoother and support multi-axis contouring and complex operations more comparable with CNC machining. RoboTDM can reduce machining deviation to 100 μm, or 0.1 mm, which the company describes as a threefold improvement over conventional robotic accuracy. In development trials spanning several years, Fives reports cycle-time reductions of up to 70% in trimming and milling, with some individual applications achieving greater savings.

Configurable for different processes

The machining end effector can be configured with different spindle sizes, power ratings, torque and speed. Available systems can provide spindle power up to 125 kW, torque up to 80 Nm and speeds reaching 30,000 rpm, with HSK A63, HSK F63 or HSK A100 taper toolholders. RoboTDM can also incorporate automatic tool changing, tool measurement, tool-breakage detection and part probing, while a vision system can support drilling applications.

Beyond machining, the platform can be configured for waterjet cutting, laser profiling and ultrasonic cutting. Multiple workstations and customized peripheral equipment are possible, and Fives says relatively modest foundation requirements simplify installation compared with a large CNC machine tool.

Applications and limits

Fives identifies aerospace, defense, maritime and energy as sectors where component dimensions can be substantial and production requirements vary. Where tolerances tighter than 0.1 mm are required, however, the company says a high-precision CNC machine remains the appropriate choice, positioning RoboTDM as complementary to Liné Machines and the wider Fives HPM machine-tool portfolio.

The development originated from customer requirements, according to Fives, and reflects its “precision at scale” approach under the unified Fives HPM banner. Fives Liné Machines Inc., based in Granby, Quebec, Canada, has had a North American presence for almost 50 years and produces Liné CNC machine tools and robotic solutions including RoboTDM, backed by engineering, integration, automation, service and training support.

For suitable large parts, Fives says RoboTDM offers an option between conventional robotics and a large CNC machine, with potentially lower capital investment, simpler installation, greater flexibility and shorter cycle times.